 A pull off tester is indispensable for the diagnosis of building structure damages as well as for checking complete renovation work. The Dyna pull off tester is used to determine the surface strength of concrete and other materials testing it directly on the component allowing the use of any measuring point. Additionally, the Dyna pull off tester can be used for the measuring of the adhesive strength of applied coatings such as plastic coatings, concrete coats, and mortars and plasters. This mobile pull off tester allows testing on any point of a structure without having to install test devices prior to the casting of concrete.
Features: - Dyna pull off tester has an integrated digital manometer (with metric and imperial units)
- The pull off tester Dyna is mobile, lightweight and precise
- Constant jerk–free load increase
- An optional electrical drive unit is available with the pull off tester
Application:- Measuring the adhesive strength of applied coatings e.g. plastic or concrete coatings, mortars, plasters, bituminous coats
- Determining the surface strength of concrete and other materials
- The pull off tester is ideal for the evaluation of tensile strength in concrete renovation
Standardization:
The following standards can be applied to the pull off tester:
- ISO 4624
- EN 1015–12
- EN 1348
- BS 1881 Part 207
- ASTM C 1583
- ASTM D 4541
- ACI 503–30
- DIN 1048 Part 2
Product Variations:- Pull off tester Dyna Z series with integrated digital manometer
- Pull off tester Dyna ZE series with pressure sensor and electronic display device which allows the easy data–transfer to a PC or printer
- Optional electric drive EDm available with the pull off tester
- Pull off tester Dyna Estrich is specially designed to measure the adhesive strength of floor coatings
Technical Data:| Pull off tester Dyna Z and Dyna ZE | | | Dyna Z | Dyna ZE | | | Pull off tester
Z16 | Pull off tester
Z6 | Pull off tester
Z16 | Pull off tester
Z6 | | Tensile force | 16 kN
(3’600 lbf) | 6 kN
(1’350 lbf) | 16 kN
(3’600 lbf) | 6 kN
(1’350 lbf) | | Resolution | 0.01 N/mm2 | | Accuracy | < 2% | < 2% | | Permissible stroke | 3.5 mm | 4.0 mm | 3.5 mm | 4.0 mm | | Weight | 3.5 kg (7 lbs; 11 oz) | | Battery | type CR 2430 for manometer for 150 h operation | See below for display unit | | Operating temperature | 0 °C to +60 °C (32 °F to 140 °F) | | Storage temperature | -10 °C to +60 °C (14 °F to 140 °F) | | Total weight | 6 kg (13 lbs; 3 oz) | 7.8 kg (17 lbs; 3 oz) | | Pull off tester Dyna ZE – Dynameter display device | | Memory | non–volatile memory for 1’000 measured values | | Display | graphic LCD display 128 x 128 pixel with backlight | | Data output | RS 232 interface or with adapter to USB | | Software | integrated software for the transmission of measured values to a printer or PC | | Battery | six LR6 (AA), 1.5 V (60 h operation) | | Weight | 1.8 kg (4 lbs) | | Pull off tester Dyna Estrich | | Display | in N/mm2 based on dia. 50 mm test disc | | Tensile force | max. 4400 N (990 lbf) | | Tensile strength | 2.2 N/mm2 (320 psi) | | Accuracy | < 3% | | Tensile stroke | 20 mm (0.79 in.) | | Total weight | 2.8 kg (6 lbs; 3 oz) |
| |
Warranty: - Standard 2–year limited warranty on electronic parts of the pull off tester
- Optional extended warranty periods up to 3 additional years
Product Brochure for Pull Off Tester – Dyna |
